Cultivator de mirişte Verti-till turbo cultivator Green Wave of 9.1 m nou

PDF
cultivator de mirişte Verti-till turbo cultivator Green Wave of 9.1 m nou
cultivator de mirişte Verti-till turbo cultivator Green Wave of 9.1 m nou
cultivator de mirişte Verti-till turbo cultivator Green Wave of 9.1 m nou imagine 2
cultivator de mirişte Verti-till turbo cultivator Green Wave of 9.1 m nou imagine 3
cultivator de mirişte Verti-till turbo cultivator Green Wave of 9.1 m nou imagine 4
cultivator de mirişte Verti-till turbo cultivator Green Wave of 9.1 m nou imagine 5
cultivator de mirişte Verti-till turbo cultivator Green Wave of 9.1 m nou imagine 6
cultivator de mirişte Verti-till turbo cultivator Green Wave of 9.1 m nou imagine 7
cultivator de mirişte Verti-till turbo cultivator Green Wave of 9.1 m nou imagine 8
cultivator de mirişte Verti-till turbo cultivator Green Wave of 9.1 m nou imagine 9
cultivator de mirişte Verti-till turbo cultivator Green Wave of 9.1 m nou imagine 10
cultivator de mirişte Verti-till turbo cultivator Green Wave of 9.1 m nou imagine 11
cultivator de mirişte Verti-till turbo cultivator Green Wave of 9.1 m nou imagine 12
Vă interesează anunțul?
1/12
PDF
Preţ:
la cerere
Solicită prețul
Luați legătura cu vânzătorul
Locul de amplasare: Ucraina m.Dnipro8446 km față de tine
Numărul ID din stocul vânzătorului: 10061
Data publicării: Produse noi - astăzi
Descriere
Lărgimea presei: 18.2 m
Stare
Stare: nou

Informaţie suplimentară — Cultivator de mirişte Verti-till turbo cultivator Green Wave of 9.1 m nou

In the presence of units with different working widths: 2.6 m, 3.9 m, 5.2 m, 6.5 m, 7.8 m, 9.1 m, 10.4 m, 11.7 m, 18.2 m.
Designed for various types of autumn-spring field work:


field work with a lot of crop residues;
crushing of a solid surface soil layer;
application and mixing of herbicides, compost and fertilizers;
preparation of the field, seed bed with traditional, preserving and zero technologies.


Advantages and design features of the Green Wave vertical tillage turbo cultivator with a working width of 9.1  m:


it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
it is aggregated with wheel and caterpillar tractors with engine power corresponding to the width of a particular model;
It is a trailed machine, it is controlled and serviced by one person (tractor driver);
the working bodies of the turbo cultivator are 13-wave turbo discs mounted on spring blocks;
vertical vibration of turbo discs affects the earth like a jackhammer, crushing the soil below the working depth level, breaking soil compaction and creating conditions for the accumulation and preservation of soil moisture;
when working on very heavy soils, it is possible to install discs at an angle in the range from 0 ° to 6 °. This makes it possible to better loosen and level the soil in difficult conditions;
spring blocks mounted on the frame in a checkerboard pattern, for better passage of crop residues;
equipped with a 3-row flex harrow and a spiral-shaped ribbed roller for even distribution of crop residues and crumbling of soil lumps;
the transfer of the turbo cultivator from the working position to the transport one, and vice versa, is carried out using hydraulic drives. In the parking position, the turbo cultivator is installed on the parking jack;
to adjust the degree of impact of the train harrow on the soil and plant debris, it is possible to set two tooth positions - 50 ° and 38 °, this is achieved by reversing the sections of the train;
range of working depth 0-18 cm;
the distance between the turbo discs is 16 cm;
5 bolt reinforced hub with two sealed SKF bearings;
the force of the springs at which the operation of the safety mechanism of the safety unit begins is 500 kg
the vertical stroke of the spring unit with turbo discs for circumventing obstacles is up to 250 mm.


Basic equipment:


turbo cultivator;
wavy turbo discs 570 mm x 5 mm 13 waves (32 mm wave depth);
three-row flex harrow;
spiral-shaped ribbed roller.


Additional equipment:


tubular roller with a flex harrow;
special loaders of the unit frame, for using a turbo cultivator on heavy soils, for better penetration of discs into the soil;
wavy turbo discs 550 mm x 5 mm 8 waves (65 mm wave depth);
mechanical granular fertilizer application system (for models with a working width of 2.6 m, 3.9 m, 5.2 m).


Specifications:

Type ... trailed
Tractor hitch ... pendulum
Average speed, km / h ... 15
Working width, m ... 9.1
Working length, m ... 8.9
Length during transportation, m ... 8.9
Height during transportation, m ... 4
Width during transportation, m ... 5.5
Total weight, t ... 10.2
Number of spring blocks, pcs … 28
Number of turbo disks, pcs ... 56
The distance between the turbo disks, m ... 0.162
Depth of processing, mm ... 0-180
Depth adjustment ... set of clips 50/30/19/10 / 7mm on the rods of hydraulic cylinders
Tire Sizes:
The support wheels of the wing frames ... 10.0 / 75-15.3 (14PR)
The support wheels of the frames of the central frame ... 19.0 / 45-17 (18PR)
Tire pressure, bar ... 4-5
Hydraulic system pressure, bar ... 180
Minimum tractor power, hp ... 400
When deep processing is recommended, hp ... 450
The number of staff, people ... 1
field work with a lot of crop residues;
crushing of a solid surface soil layer;
application and mixing of herbicides, compost and fertilizers;
preparation of the field, seed bed with traditional, preserving and zero technologies.
it is used in various soil and climatic zones when treating soils of different mechanical composition with moisture up to 28% and hardness up to 3.5 MPa (35 kg / cm²), not clogged with stones, flagstone and other obstacles;
it is aggregated with wheel and caterpillar tractors with engine power corresponding to the width of a particular model;
It is a trailed machine, it is controlled and serviced by one person (tractor driver);
the working bodies of the turbo cultivator are 13-wave turbo discs mounted on spring blocks;
vertical vibration of turbo discs affects the earth like a jackhammer, crushing the soil below the working depth level, breaking soil compaction and creating conditions for the accumulation and preservation of soil moisture;
when working on very heavy soils, it is possible to install discs at an angle in the range from 0 ° to 6 °. This makes it possible to better loosen and level the soil in difficult conditions;
spring blocks mounted on the frame in a checkerboard pattern, for better passage of crop residues;
equipped with a 3-row flex harrow and a spiral-shaped ribbed roller for even distribution of crop residues and crumbling of soil lumps;
the transfer of the turbo cultivator from the working position to the transport one, and vice versa, is carried out using hydraulic drives. In the parking position, the turbo cultivator is installed on the parking jack;
to adjust the degree of impact of the train harrow on the soil and plant debris, it is possible to set two tooth positions - 50 ° and 38 °, this is achieved by reversing the sections of the train;
range of working depth 0-18 cm;
the distance between the turbo discs is 16 cm;
5 bolt reinforced hub with two sealed SKF bearings;
the force of the springs at which the operation of the safety mechanism of the safety unit begins is 500 kg
the vertical stroke of the spring unit with turbo discs for circumventing obstacles is up to 250 mm.
turbo cultivator;
wavy turbo discs 570 mm x 5 mm 13 waves (32 mm wave depth);
three-row flex harrow;
spiral-shaped ribbed roller.
tubular roller with a flex harrow;
special loaders of the unit frame, for using a turbo cultivator on heavy soils, for better penetration of discs into the soil;
wavy turbo discs 550 mm x 5 mm 8 waves (65 mm wave depth);
mechanical granular fertilizer application system (for models with a working width of 2.6 m, 3.9 m, 5.2 m).
Afișează tot comentariul
Important
Această ofertă are caracter orientativ. Informaţiile exacte trebuie solicitate vânzătorului.
Recomandări pentru achiziționare
Sugestii privind securitatea
Verificarea vânzătorului

Dacă ați decis achiziționarea echipamentului la un preț mic, trebuie să fiți sigur că persoana cu care comunicați este un vânzător real. Aflați toate informațiile disponibile cu privire la proprietarul echipamentului. O metodă de înșelăciune este aceea de a se prezenta ca o societate existentă în mod real. În caz de îndoială, vă rugăm să luați legătura cu noi prin formularul de feedback, pentru alte controale.

Verificarea prețului

Înainte de a decide o achiziție, examinați cu atenție diferite oferte de vânzare pentru a cunoaște costul mediu al modelului ales. Dacă prețul din oferta care vă place este mult mai mic față de alte oferte asemănătoare, gândiți-vă bine. O diferență de preț importantă poate indica defecte ascunse sau o tentativă a vânzătorului de a comite o înșelăciune.

Nu cumpărați produse care au prețuri mult diferite față de prețul mediu al altor produse asemănătoare

Nu dați acordul la plata unor cauțiuni suspecte sau plăți anticipate ale mărfurilor. În caz de îndoieli, clarificați amănuntele, solicitați mai multe fotografii și documente privind mașina, verificați autenticitatea documentelor, puneți întrebări.

Plată în avans îndoielnică

Cel mai răspândit tip de înșelăciune. Vânzătorii necinstiți pot cere o anumită sumă din avans, pentru ”rezervarea” dreptului de achiziționare a mijlocului. În acest mod ei strâng o mare sumă de bani, după care dispar, fără a putea fi contactați.

Variantele acestui tip de înșelăciune pot include:
  • Transferul plății anticipate pe card
  • Nu efectuați plata anticipată fără semnarea documentelor care să ateste procesul de transfer de bani, dacă în timpul tratativei vânzătorul are îndoieli.
  • Transfer în contul ”curatorului”
  • O astfel de solicitare trebuie să vă alarmeze, foarte probabil comunicați cu o persoană care urmărește să vă înșele.
  • Transferul în contul societății cu un nume asemănător
  • Atenție, persoanele rău intenționate se pot ascunde în spatele unor societăți renumite, aducând mici modificări numelui societății. Nu efectuați transfer de bani dacă numele societății este dubios.
  • Înlocuirea propriilor date în factura societății reale
  • Înainte de efectua transferul de bani, vă rugăm să verificați corectitudinea datelor bancare și dacă acestea aparțin societății indicate.
Ați întâlnit o înșelăciune?
Vă rugăm să ne anunțați
Sugestii privind securitatea
PDF
Vindeți utilaje sau vehicule?
Faceți-o cu noi!
Anunțuri asemănătoare
cultivator de mirişte Disk-share harrow 4.2 m nou cultivator de mirişte Disk-share harrow 4.2 m nou
2
Preț la cerere
Lărgimea presei 4.2 m Adâncimea de tratare 400 mm Puterea necesară a tractorului 280 c.p. Viteza de lucru 15 km/h
Ucraina, m.Dnipro
Luați legătura cu vânzătorul
cultivator de mirişte Spring teeth and cables 3M, 2секции under tilling machines nou cultivator de mirişte Spring teeth and cables 3M, 2секции under tilling machines nou cultivator de mirişte Spring teeth and cables 3M, 2секции under tilling machines nou
3
€ 200.70 UAH 9033
Lărgimea presei 3 m
Ucraina, m.Dnipro
Luați legătura cu vânzătorul
Preț la cerere
Lărgimea presei 6.5 m Adâncimea de tratare 180 mm Puterea necesară a tractorului 280 c.p.
Ucraina, m.Dnipro
Luați legătura cu vânzătorul
$ 35000 ≈ € 32150
2006
Ucraina, Farbovane
Luați legătura cu vânzătorul
€ 11650 Cu TVA
2019
Lărgimea presei 3 m Adâncimea de tratare 250 mm Puterea necesară a tractorului 130 c.p.
Ucraina, Shumskoy r-n, s. V.Dederkaly
Luați legătura cu vânzătorul
cultivator de mirişte Lemken KOMPAKTOR cultivator de mirişte Lemken KOMPAKTOR
2
€ 12000
2006
Lărgimea presei 6 m
Ucraina, Kyiv
Luați legătura cu vânzătorul
$ 5600 ≈ € 5144
2020
Lărgimea presei 3 m Adâncimea de tratare 120 mm Puterea necesară a tractorului 90 c.p.
Ucraina
Luați legătura cu vânzătorul
Preț la cerere
2022
Ucraina
Luați legătura cu vânzătorul
Preț la cerere
2024
Lărgimea presei 5 m Adâncimea de tratare 250 mm Puterea necesară a tractorului 170 c.p.
Ucraina, Shumskoy r-n, s. V.Dederkaly
Luați legătura cu vânzătorul
Preț la cerere
2012
Lărgimea presei 13.5 m
Ucraina, Zolochiv
Luați legătura cu vânzătorul
€ 15300 Cu TVA
2024
Lărgimea presei 3 m Adâncimea de tratare 250 mm Puterea necesară a tractorului 140 c.p.
Ucraina, Lutsk
Luați legătura cu vânzătorul
$ 12000 ≈ € 11020
2004
Lărgimea presei 6.5 m
Ucraina
Luați legătura cu vânzătorul
€ 9200 Cu TVA
2024
Lărgimea presei 3 m Adâncimea de tratare 300 mm Puterea necesară a tractorului 150 c.p.
Ucraina, Lutsk
Luați legătura cu vânzătorul
€ 1
Lărgimea presei 6 m Adâncimea de tratare 300 mm Puterea necesară a tractorului 240 c.p.
Ucraina, Mironovka
Luați legătura cu vânzătorul
Preț la cerere
2024
Adâncimea de tratare 250 mm
Ucraina, Lutsk
Luați legătura cu vânzătorul
$ 16500 ≈ € 15160
Lărgimea presei 4.8 m
Ucraina
Luați legătura cu vânzătorul
€ 19800 Cu TVA
2022
Lărgimea presei 3 m Puterea necesară a tractorului 200 c.p.
Ucraina, Lutsk
Luați legătura cu vânzătorul
$ 19000 ≈ € 17450
2008
Lărgimea presei 5 m Adâncimea de tratare 350 mm
Ucraina, Ohinki
Luați legătura cu vânzătorul
$ 36000 ≈ € 33070
Lărgimea presei 13 m
Ucraina, Kirovograd
Luați legătura cu vânzătorul
$ 32000 ≈ € 29400
Lărgimea presei 11.7 m Adâncimea de tratare 127 mm Puterea necesară a tractorului 350 c.p. Viteza de lucru 8 km/h
Ucraina
Luați legătura cu vânzătorul